Comments, suggestions, or questions on this document should be addressed to U.S. Army
Tank-automotive and Armaments Command, ATTN: RDTA-EN/DM/STND, MS# 268, 6501 E.
11 Mile Road, Warren, MI 48397-5000 or emailed to
DAMI_STANDARDIZATION@conus.army.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
http://assist.daps.dla.mil.
AMSC N/A FSC 4720
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
INCH-POUND
MIL-PRF-11588H
21 July 2009
SUPERSEDING
MIL-PRF-11588G
15 September 1996
PERFORMANCE SPECIFICATION
HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID
PETROLEUM FUELS, DISPENSING, COLLAPSIBLE,
STANDARD AND LOW TEMPERATURE
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification defines the requirements for collapsible, synthetic rubber,
discharge hose assemblies for use in all ambient temperatures between minus (-) 25 and plus (+)
160 degrees Fahrenheit (F) for standard temperature hose and -60 and +95F for low
temperature hose.
1.2 Classification. The collapsible discharge hose assemblies will be of the following
types, classes, sizes, and styles as specified (see 6.2):
Type I - Hose assembly, gasoline dispensing pump.
Class 1 - Coupling halves, quick-disconnect, cam-locking type, hose shank;
female both ends.
Class 2 - Coupling halves, quick-disconnect, cam-locking type, hose shank; male
both ends.
Class 3 - Coupling halves, quick-disconnect, cam-locking type, hose shank;
female one end, male other end.
Downloaded from http://www.everyspec.com
