Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to: commandstandards@navsea.navy.mil
, with the subject line “Document Comment”. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at http://assist.daps.dla.mil
.
AMSC N/A FSC 4330
INCH-POUND
MIL-PRF-15618H (SH)
18 January 2006
SUPERSEDING
MIL-PRF-15618G(SH)
7 January 2002
PERFORMANCE SPECIFICATION
FILTER-SEPARATOR,
FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope
. This specification covers filter-separator assembly (see 6.5.2) for use in shipboard fuel systems.
The filter-separator assembly described in this specification, with filter elements qualified to MIL-PRF-32148, is
intended for use onboard Naval ships to remove solids and water from fuel systems. These filter-separator
assemblies are used with JP-5 fuel for aircraft, Naval Distillate or JP-5 for propulsion and auxiliary power gas
turbines, Naval Distillate or JP-5 for diesel engines, and other miscellaneous internal combustion engines.
2. APPLICABLE DOCUMENTS
2.1 General
. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents
.
2.2.1 Specifications, standards, and handbooks
. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901 -
Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and
Systems, Requirements For
MIL-DTL-5624 - Turbine Fuel, Aviation, Grades JP-4 and JP-5
MIL-PRF-16884 - Fuel, Naval Distillate
MIL-PRF-32148 -
Filter Separator Elements, Fluid, Pressure, Aviation and Distillate Fuel,
Naval Shipboard
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-167-1 -
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental
and Type II - Internally Excited)
Downloaded from http://www.everyspec.com
