AMSC/NA FSC 4020
MIL-PRF-17343E
24 February 2017
SUPERSEDING
MIL-R-17343D
2 June 1969
MILITARY PERFORMANCE SPECIFICATION
ROPE, NYLON
This specification is approved for use by all departments and Agencies of the Department of
Defense
1. SCOPE
1.1 Scope. This specification covers the requirements of nylon rope for general purpose use.
2. APPLICABLE D
OCUMENTS
2.1 General. The documents listed in this section are specified in sections 4 and 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to insure the completeness of this list, document users are cautioned that they must
meet all specified requirements documents cited in sections 4 and 5 of this specification, whether
or not they are listed.
2.2 Government Documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified
the issues of these documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).
STANDARDS
F
EDERAL
FED-STD-191 - Textile Test Methods
(Copies of these documents are available online at http://quicksearch.dla.mil
.)
Comments, suggestions, or questions on this document should be addressed to DLA Troop
Support – Industrial Hardware Division (ATTN: Code FHTE), 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or email trpsptspecspa@dla.mil
. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
Downloaded from http://www.everyspec.com
