Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, SEA 05Q, Naval Sea Systems Command, 2531 Jefferson Davis Hwy,
Arlington, VA 22242-5160 by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 4140
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
INCH-POUND
MIL-PRF-19004B
25 May 2001
SUPERSEDING
MIL-F-19004A
18 April 1983
PERFORMANCE SPECIFICATION
FANS, CENTRIFUGAL, VENTILATION, NAVAL SHIPBOARD
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers centrifugal fans for use in Naval
shipboard heating, ventilating, and air conditioning systems.
1.2 Classification. Fans covered by this specification are of the following
types, as specified (see 6.1).
Type CC - Centrifugal, motor driven (high-impact - shock)
Type X-CC - Centrifugal, motor driven (non-Shock, commercial motor)
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in Sections
3 and 4 of this specification. This section does not include documents cited
in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet
all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards. The following specifications, standards,
publications and handbooks form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents
are be those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the
solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-S-901 Shock Tests, H.I. (High-Impact); Shipboard
Machinery, Equipment and Systems, Requirements
for
MIL-B-17931 Bearings, Ball, Annular, for Quiet Operation
Downloaded from http://www.everyspec.com
