**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-05 14 00.13 (November 2019)
------------------------------------
Preparing Activity: NASA Superseding
UFGS-05 14 00.1
3 (May 2015)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 05 - METALS
SECTION 05 14 00.13
WELDING STRUCTURAL ALUMINUM FRAMING
11/19
PART 1 GENERAL
1.1 REFERENCES
1.2 DEFINITIONS
1.2.1 Class A Fabrication
1.2.2 Class B Fabrication
1.2.3 Class C Fabrication
1.2.4 Class D Fabrication
1.3 ADMINISTRATIVE REQUIREMENTS
1.3.1 Pre-Installation Meetings
1.4 SUBMITTALS
1.5 QUALITY CONTROL
1.5.1 Certificates
1.5.2 Predictive Testing And Inspection Technology Requirements
PART 2 PRODUCTS
PART 3 EXECUTION
3.1 EXAMINATION
3.2 PREPARATION
3.2.1 Protection
3.2.2 Surface Preparation
3.2.3 Welding Equipment
3.2.4 Heat Input Requirements
3.2.4.1 Preheat
3.2.4.2 Interpass
3.2.4.3 Postweld
3.3 FIELD QUALITY CONTROL
3.3.1 Class A Fabrication
3.3.2 Class B Fabrication
3.3.3 Class C Fabrication
3.3.4 Class D Fabrication
SECTION 05 14 00.13 Page 1
