**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-05 40 00 (May 2015)
Change 1 - 08/18
------------------------------------
Preparing Activity: NAVFAC Superseding
UFGS-05 40 00 (
May 2010)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 05 - METALS
SECTION 05 40 00
COLD-FORMED METAL FRAMING
05/15, CHG 1: 08/18
PART 1 GENERAL
1.1 REFERENCES
1.2 SUBMITTALS
1.3 DELIVERY, STORAGE, AND HANDLING
1.4 LOAD-BEARING COLD-FORMED METAL FRAMING
1.5 MAXIMUM DEFLECTION
1.6 QUALITY ASSURANCE
1.6.1 Drawing Requirements
1.6.2 Design Data Required
PART 2 PRODUCTS
2.1 STEEL STUDS, JOISTS, TRACKS, BRACING, BRIDGING AND ACCESSORIES
2.1.1 Studs and Joists of 1.37 mm 54 mils (0.054 Inch) and Heavier
2.1.2 Studs and Joists of 1.09 mm 43 mils (0.043 Inch) and Lighter
2.1.3 Sizes, Thickness, Section Modulus, and Other Structural
Properties
2.2 MARKINGS
2.3 CONNECTIONS
2.3.1 Steel-To-Concrete Connections
2.3.2 Steel-To-Steel Connections
2.4 PLASTIC GROMMETS
2.5 SEALER GASKET
PART 3 EXECUTION
3.1 TRUSS FABRICATION
3.2 FASTENING
3.2.1 Welds
3.2.2 Screws
3.2.3 Anchors
3.2.4 Powder-Actuated Fasteners
3.3 INSTALLATION
SECTION 05 40 00 Page 1
