**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-05 50 14 (August 2018)
------------------------------------
Preparing Activity: USACE Superseding
UFGS-05 50 14 (
May 2014)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 05 - METALS
SECTION 05 50 14
STRUCTURAL METAL FABRICATIONS
08/18
PART 1 GENERAL
1.1 REFERENCES
1.2 SUBMITTALS
1.3 QUALITY ASSURANCE
1.3.1 Detail Drawings
1.3.2 Welding Qualifications
PART 2 PRODUCTS
2.1 FABRICATION
2.1.1 Structural Fabrication
2.1.1.1 Dimensional Tolerances for Structural Work
2.1.1.2 Structural Steel Fabrication
2.1.1.3 Structural Aluminum Fabrication
2.1.2 Welding
2.1.2.1 Welding of Structural Steel
2.1.2.1.1 Welding Procedures for Structural Steel
2.1.2.1.2 Welding Process
2.1.2.1.3 Welding Technique
2.1.2.1.3.1 Filler Metal
2.1.2.1.3.2 Preheat and Interpass Temperature
2.1.2.1.3.3 Stress-Relief Heat Treatment
2.1.2.1.4 Workmanship
2.1.2.1.4.1 Preparation of Base Metal
2.1.2.1.4.2 Temporary Welds
2.1.2.1.4.3 Tack Welds
2.1.2.2 Welding of Steel Castings
2.1.2.3 Welding of Steel Studs
2.1.2.3.1 Application Qualification for Steel Studs
2.1.2.3.2 Production Control
2.1.2.4 Welding of Aluminum
2.1.3 Bolted Connections
2.1.3.1 Bolted Structural Steel Connections
SECTION 05 50 14 Page 1
