**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-09 96 00 (November 2014)
------------------------------------
Preparing Activity: NASA Superseding
UFGS-09 96 00 (
July 2007)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 09 - FINISHES
SECTION 09 96 00
HIGH-PERFORMANCE COATINGS
11/14
PART 1 GENERAL
1.1 REFERENCES
1.2 SUBMITTALS
1.3 QUALITY CONTROL
1.4 DELIVERY, STORAGE, AND HANDLING
PART 2 PRODUCTS
2.1 PERFORMANCE REQUIREMENTS
2.1.1 Heat-Resistant Coatings
2.1.1.1 Category 1, 10 to 204 Degrees C 50 to 400 Degrees F
2.1.1.2 Category 2, 149 to 316 Degrees C 300 to 600 Degrees F
2.1.1.3 Category 3, 316 to 427 Degrees C 600 to 800 Degrees F
2.1.1.4 Category 4, 427 to 649 Degrees C 800 to 1,200 Degrees F
2.2 MATERIALS
2.2.1 Epoxy Coatings
2.2.1.1 Concrete Surface Coatings
2.2.1.2 Masonry Surfaces Coatings
2.2.1.3 Ferrous and Galvanized Metal Surface Coatings
2.2.1.4 Aluminum Surface Coatings
2.2.2 Polyurethane Coatings
2.2.2.1 Concrete Surface Coatings
2.2.2.2 Masonry Surface Coatings
2.2.2.3 Ferrous and Galvanized Metal Surface Coatings
2.2.2.4 Aluminum Surface Coatings
2.2.2.5 Wood Surface Coatings
2.2.3 Chlorinated-Rubber Coatings
2.2.3.1 Concrete Surface Coatings
2.2.3.2 Masonry Surface Coatings
2.2.3.3 Ferrous and Galvanized Metal Surface Coatings
2.2.3.4 Aluminum Surface Coatings
PART 3 EXECUTION
SECTION 09 96 00 Page 1
