**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-32 12 16.16 (November 2020)
------------------------------------
Preparing Activity: USACE Superseding
UFGS-32 12 16 (
August 2009)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 32 - EXTERIOR IMPROVEMENTS
SECTION 32 12 16.16
ROAD-MIX ASPHALT PAVING
11/20
PART 1 GENERAL
1.1 PERCENT PAYMENT
1.1.1 Method of Measurement
1.1.2 Basis of Payment
1.1.3 Lot Pay Factor
1.1.4 Payment Adjustment for Laboratory Air Voids
1.1.4.1 Pay Factor Example for Laboratory Air Voids
1.1.5 Payment Adjustment for In-place Densities
1.1.5.1 Pay Factor Example for In-place Density
1.1.6 Payment Adjustment for Smoothness (Final Wearing Surface Only)
1.1.7 Payment Adjustment for Plan Grade
1.2 PAYMENT
1.2.1 Method of Measurement
1.2.2 Basis of Payment
1.3 REFERENCES
1.4 SUBMITTALS
1.5 ACCEPTANCE
1.5.1 Acceptability of Work
1.5.2 Acceptance Requirements
1.5.3 Pavement Lots
1.5.4 Sublot Sampling
1.5.5 Additional Sampling and Testing
1.5.6 Theoretical Maximum Density (TMD)
1.5.7 Laboratory Air Voids
1.5.7.1 Tolerance
1.5.7.2 Calculating Laboratory Air Voids
1.5.8 In-place Density
1.5.8.1 Tolerance
1.5.9 Surface Smoothness
1.5.9.1 Smoothness Requirements
1.5.9.1.1 Straightedge Testing
1.5.9.1.2 Profilograph Testing
1.5.9.2 Testing Method
SECTION 32 12 16.16 Page 1
