**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-32 12 15.13 (November 2020)
Change 1 - 05/22
------------------------------------
Preparing Activity: USACE Superseding
32 12 15.13 (No
vember 2017)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 32 - EXTERIOR IMPROVEMENTS
SECTION 32 12 15.13
ASPHALT PAVING FOR AIRFIELDS
11/20, CHG 1: 05/22
PART 1 GENERAL
1.1 FULL PAYMENT
1.1.1 Method of Measurement
1.1.2 Basis of Payment
1.2 PERCENT PAYMENT
1.2.1 Mat and Joint Densities
1.2.2 Pay Factor Based on In-place Density
1.2.3 Payment Adjustment for Smoothness (Final Wearing Surface Only)
1.2.3.1 Longitudinal Smoothness
1.2.4 Laboratory Air Voids and Theoretical Maximum Density
1.2.4.1 Mean Absolute Deviation
1.2.5 Pay Factor Based on Plan Grade
1.3 REFERENCES
1.4 AIRFIELD ASPHALT PAVING WORKSHOP
1.5 SUBMITTALS
1.6 CONTRACTOR QUALITY CONTROL STAFF
1.7 ACCEPTANCE
1.7.1 Acceptability of Work
1.7.2 Acceptance Requirements
1.7.3 Pavement Lots
1.7.4 Sublot Sampling
1.7.5 Additional Sampling and Testing
1.7.6 Theoretical Maximum Density (TMD)
1.7.7 Laboratory Air Voids
1.7.8 In-place Density
1.7.9 Surface Smoothness
1.7.9.1 Straightedge Testing
1.7.9.2 Profilograph Testing
1.7.9.3 Final Profilograph Testing
1.7.10 Plan Grade
1.8 Laboratory Accreditation and Validation
1.9 ENVIRONMENTAL REQUIREMENTS
SECTION 32 12 15.13 Page 1
