**************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-07 57 13 (May 2011)
Change 3 - 08/18
------------------------------------
Preparing Activity: NAVFAC Superseding
UFGS-07 57 13 (
August 2010)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2022
**************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 07 - THERMAL AND MOISTURE PROTECTION
SECTION 07 57 13
SPRAYED POLYURETHANE FOAM (SPF) ROOFING
05/11, CHG 3: 08/18
PART 1 GENERAL
1.1 REFERENCES
1.2 DESCRIPTION OF ROOF SYSTEM
1.2.1 Design Requirements
1.2.1.1 Fire and Wind Uplift
1.2.2 Performance Requirements
1.3 SUBMITTALS
1.4 QUALITY ASSURANCE
1.4.1 Qualification of Manufacturer
1.4.1.1 Manufacturer's Technical Representative
1.4.2 Qualification of Applicator
1.4.3 Preroofing Conference
1.4.4 Foam Roof System Mock-Up
1.4.5 Sample Warranty
1.5 DELIVERY, STORAGE, AND HANDLING
1.5.1 Delivery
1.5.2 Storage
1.5.3 Handling
1.6 ENVIRONMENTAL CONDITIONS
1.6.1 Primer
1.6.2 Sprayed Polyurethane Foam
1.6.3 Elastomeric Coating
1.7 COORDINATION
1.7.1 Flashing
1.8 WORK SEQUENCE
1.9 FOAM SPRAY EQUIPMENT
1.9.1 Applicator
1.9.2 Equipment Calibration
1.9.3 Metering Equipment Requirements
1.9.4 Moisture Protection
1.9.5 Compressed Air
1.9.6 Dispense Excess Materials
1.10 SPECIAL SAFETY PROVISIONS
SECTION 07 57 13 Page 1
