Data Item Description
Title: Mechanical Vibrations of Shipboard Equipment Measurement Test Data
Number: DI-ENVR-81647
AMSC Number: N7530
DTIC Applicable: N/A
Office of Primary Responsibility: SH SEA051
Approval Date: 20040809
Limitation: N/A
GIDEP Applicable: N/A
Applicable forms: N/A
Use/ Relationship:
This DID provides a test plan and report of the vibratory test procedure, facility, and measurement
system for MIL-STD-167-1 for Type I vibration testing.
a. This DID contains the format and content preparation instructions for that data generated
under the work task described by Section 5 of MIL-STD-167-1.
b. This DID is to be applied for each type, class, rating, and grade of equipment to be tested on
each contract or order when MIL-STD-167-1 is invoked.
Requirements:
1. Reference document
. The applicable issue of the documents cited herein, including their
approval dates and dates of any applicable amendments, notices, and revisions, shall be as
specified in the contract.
2. Format and Content
: The Mechanical Vibrations of Shipboard Equipment Measurement Test
Data shall be presented in the contractor’s format and shall contain Sections I and II.
2.1 Section – I Test Plan. This section shall contain the following:
a. Equipment to be evaluated
b. Contract number
c. Ship names and hull number, if known, for which the unit is being acquired
d. Range of frequencies over which the item is to be tested with the corresponding
input amplitudes
e. Evaluation measurements to be performed
f. Evaluating activity and test site
g. Test date if established
h. Driver unit horsepower (HP)
i. Rated Electrical Characteristics, including volts, amps, phase, as applicable
j. Rated fluid media parameters (flow rates, temperatures, pressures, etc.), as
applicable
Page 1 of 3
Downloaded from http://www.everyspec.com
