DATA ITEM DESCRIPTION
Title: ENVIRONMENTAL STRESS SCREENING (ESS) REPORT
Number: DI-ENVR-81663 Approval Date: 20060511
AMSC Number: N7565 Limitation:
DTIC Applicable: GIDEP Applicable:
Office of Primary Responsibility: N/PEO IWS 1.0
Applicable Forms: N/A
Use/Relationship: The Environmental Stress Screening (ESS) Report is a formal record of the
contractor’s environmental stress screening results. This report is used by the procuring activity to
evaluate the effectiveness of the contractor’s ESS program and monitor ESS results.
This Data Item Description (DID) contains the format, content, and preparation instructions for the
data product resulting from the work task specified in the contract.
Requirements:
1.0 Format. The ESS report shall be in contractor’s format.
2.0 Content. The ESS report shall contain the following sections:
2.1 Random Vibration. This section shall contain the following:
a. Report period.
b. Equipment nomenclature.
c. Equipment part number.
d. Subassembly part number (if ESS is performed at the subassembly level).
e. Date of the vibration screen.
f. Serial number of the unit(s) subjected to vibration screen.
g. Axis of vibration.
h. Time at the start of vibration.
i. Time when vibration stopped.
j. Duration of the vibration screen.
k. Elapsed time from the start of the vibration screen to each failure (if applicable).
l. Failed component (circuit card, module or assembly).
m. Part number or name of failed part.
n. Reference designation of failed part.
o. Failure mode of failed part.
p. Cause of failure of part.
q. Corrective action required, taken or planned.
r. Analysis of results to determine screening effectiveness.
s. Any recommended changes to the ESS procedures or program.
Page 1 of 2
Downloaded from http://www.everyspec.com
