MIL-PRF-20696F
2 September 1997
SUPERSEDING
MIL-C-20696E
1 June 1987
PERFORMANCE SPECIFICATION
CLOTH, WATERPROOF, WEATHER RESISTANT
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1.1 Scope. This specification covers the requirements for four types and four classes of
weather resistant, waterproof cloth.
1.2 Classification. (see 6.2):
Type I - Cloth, Moderate strength, dimensionally stable
Type II - Cloth, High strength, dimensionally stable
Type III - Cloth, Ultra High strength, dimensionally stable
Type IV - Cloth, High strength
Class 1 - Extreme cold temperature flexibility
Class 2 - Cold temperature flexibility, flame retardant
Class 3 - Extreme cold temperature flexibility, flame resistant
Class 5 - Extreme temperature resistance
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 4 and 5 of this
standard. This section does not include documents cited in other sections of this standard or
recommended for additional information or as examples. While every effort has been made
to ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 4 and 5 of this standard, whether or not
they are listed.
Beneficial comments, (recommendations, additions, deletions, clarifications) and any
pertinent data which may be of use in improving this document should be sent to:
Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FNS,
2800 South 20th Street, Philadelphia, PA 19145-5099 by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A FSC 8305
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
INCH-POUND
Downloaded from http://www.everyspec.com
