INCH-POUND
MIL-PRF-20092M
27 September 2004
SUPERSEDING
MIL-PRF-20092L
27 October 1986
PERFORMANCE SPECIFICATION
RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES,
SYNTHETIC, FOAM OR SPONGE, OPEN CELL
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers inherently combustion retardant flexible foam or sponge materials
with low emission of smoke and toxic products to be used for mattresses, cushioning, and packaging applications.
1.2 Classification. Cellular synthetic rubber or plastic will be of the following type, class, and
conditions, as specified (see 3.6.1, 3.6.2.1, and 6.2):
Type II - Uncored.
Class 5 - Fire retardant, low smoke (for shipboard use).
Condition A - Medium.
Condition B - Medium firm.
Condition C - Firm.
Condition D - Soft.
Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to commandstandards@navsea.navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at www.dodssp.daps.mil
AMSC N/A FSC 9320
Downloaded from http://www.everyspec.com
