AMSC N/A FSC 8135
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
PERFORMANCE SPECIFICATION
BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE
CORROSION INHIBITOR TREATED
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for heat or pressure sealable,
transparent, flexible barrier material treated with a volatile corrosion inhibitor (VCI) for use in
military packaging (see 6.1).
1.2 Classification. Barrier materials are furnished in the following types.
Type I - Heat-sealable
Type II - Pressure (cold) sealable
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data
which may be of use in improving this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 414100B120-3, Highway 547,
Lakehurst, NJ 08733-5100, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
NOT MEASUREMENT
SENSITIVE
MIL-PRF-22019D
31 August 1998
SUPERSEDING
MIL-B-22019C
8 January 1974
Downloaded from http://www.everyspec.com
