NOT MEASUREMENT
SENSITIVE
MIL-PRF-22019E
23 June 2006
SUPERSEDING
MIL-PRF-22019D
w/AMENDMENT 1
14 July 2004
PERFORMANCE SPECIFICATION
BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE
CORROSION INHIBITOR TREATED
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for heat or pressure sealable,
transparent, flexible barrier material containing a volatile corrosion inhibitor (VCI) for use in
military packaging (see 6.1).
1.2 Classification. Barrier materials are furnished in the following types.
Type I - Heat-sealable
Type II - Pressure (cold) sealable
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to:
Commander, Naval Air Warfare Center Aircraft Division, Code 491000B120-3,
Highway 547, Lakehurst, NJ 08733-5100 or emailed to thomas.omara@navy.mil. Since
contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A FSC 8135
Downloaded from http://www.everyspec.com
