INCH-POUND
MIL-PRF-22344E
14 October 2004
SUPERSEDING
MIL-I-22344D
15 August 1991
PERFORMANCE SPECIFICATION
INSULATION, PIPE, THERMAL
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for fibrous pipe insulation for use as thermal
control on pipes, valves, and fittings for temperatures up to and including 370 degrees Fahrenheit (
o
F) (see 3.2 and
3.5).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to commandstandards@navsea.navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at www.dodssp.daps.mil
AMSC N/A FSC 5640
Downloaded from http://www.everyspec.com