MIL-PRF-23256C
24 March 1998
SUPERSEDING
MIL-V-23256B(AS)
3 February 1981
PERFORMANCE SPECIFICATION
VALVE ASSEMBLY, SEAL
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for a seal valve assembly which serves
as a sealing valve for a nitrogen receiver. The seal valve assembly consists of a seal valve and a
filter cartridge assembly.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements' documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
AMSC N/A FSC 4820
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
INCH-POUND
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: Commander, Naval Air Warfare
Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by
using the self-addressed Standardization Document Improvement Proposal (DD Form 1426)
appearing at the end of this document or by letter.
Downloaded from http://www.everyspec.com
