INCH-POUND
MIL-PRF-23269F
10 June 1999
SUPERSEDING
MIL-C-23269E
4 February 1993
PERFORMANCE SPECIFICATION
CAPACITORS, FIXED, GLASS DIELECTRIC,
ESTABLISHED RELIABILITY,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for established reliability, glass dielectric, fixed
capacitors. Capacitors covered by this specification have failure rate levels (FRL) established in accordance with
MIL-STD-690. These FRL are established at a 90 percent confidence level and maintained at a 10 percent
producer’s risk and are based on life tests performed with rated voltage applied at 125°C. An acceleration factor of
5:1 has been used to relate life test data obtained at 150 percent of rated voltage at 125°C to rated voltage at 125°C.
A part per million (ppm) quality system is used for documenting and reporting the average outgoing quality of
capacitors supplied to this specification. Statistical process control (SPC) techniques are required in manufacturing
process to minimize variation in production of ER capacitors supplied to the requirements of this specification.
1.2 Classification. Capacitors covered by this specification are classified by the style, as specified (see 3.1).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC/VAM,
3990 East Broad Street, Columbus, OH 43213-1199, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 5910
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Downloaded from http://www.everyspec.com
