AMSC N/A FSC 5910
INCH-POUND
MIL-PRF-23269G
30 November 2007
SUPERSEDING
MIL-PRF-23269F
22 August 2003
PERFORMANCE SPECIFICATION
CAPACITORS, FIXED, GLASS DIELECTRIC,
ESTABLISHED RELIABILITY,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope
. This specification covers the general requirements for established reliability, glass dielectric, fixed
capacitors. Capacitors covered by this specification have failure rate levels (FRL) established in accordance with
MIL-STD-690. These FRL are established at a 90 percent confidence level and maintained at a 10 percent
producer’s risk and are based on life tests performed with rated voltage applied at 125°C. An acceleration factor of
5:1 has been used to relate life test data obtained at 150 percent of rated voltage at 125°C to rated voltage at 125°C.
A part per million (ppm) quality system is used for documenting and reporting the average outgoing quality of
capacitors supplied to this specification. Statistical process control (SPC) techniques are required in manufacturing
process to minimize variation in production of ER capacitors supplied to the requirements of this specification.
1.2 Classification
. Capacitors covered by this specification are classified by the style, as specified (see 3.1).
* 1.2.1 Part or Identifying Number (PIN)
. Capacitors covered by this specification are identified by a PIN as shown
in the following example:
M23269
/01 - 3001
Performance Specification Nonsignificant
specification slash sheet dash number
number number (see 3.1)
*
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, DSCC-VAT, Post Office Box 3990, Columbus, OH 43218-3990 or e-mailed to
capacitorfilter@dla.mil
. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil
.
Downloaded from http://www.everyspec.com
