PERFORMANCE SPECIFICATION
PRIMER COATINGS: EPOXY, HIGH-SOLIDS
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers corrosion inhibiting, chemical and solvent resistant,
solvent-borne, high-solids epoxy primer coatings that have a maximum volatile
organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).
1.2 Classification. The primer coatings are of the following types and classes, as specified
(see 6.2):
1.2.1 Types. The types of primer coatings are as follows:
Type I - Standard pigments
Type II - Low infrared reflective pigments
1.2.2 Classes. The classes of primer coatings are as follows:
Class C1 - Barium chromate based corrosion inhibitors
Class C2 - Strontium chromate based corrosion inhibitors
Class N - Non-chromate based corrosion inhibitors
AMSC N/A FSC 8010
NOT MEASUREMENT
SENSITIVE
MIL-PRF-23377J
15 April 2005
SUPERSEDING
MIL-PRF-23377H
30 April 2002
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst, NJ
08733-5100 or emailed to thomas.omara@navy.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
http://assist.daps.dla.mil.
Downloaded from http://www.everyspec.com
